REIN Micro Standard Kit

From: $299.99

REIN Micro Standard

  • 1 REIN Micro
  • 1 Push-Button tail cap
  • 1 Picatinny Rail Mount for the REIN, with all mounting hardware
  • 1 Cloud Defensive labeled Nitecore Charger
  • 1 Micro USB to USB cord
  • 1 Orbtronic 18350 battery

TORRENT Mount

The Cloud Defensive “Torrent series”. Manufactured for us by Impact Weapons Components. In conjunction with Haley Strategic Partners. The best, most versatile and strongest light mounts in the industry at the best price.

DESCRIPTION

Share on facebook
Share on twitter
Share on pinterest

TECHNICAL

COMPATIBILITY

REIN Micro Standard Kit is fully compatible with any platform that allows for traditional picatinny, M-LOK (trademark) or KeyMod light mounts. The optional remote switch for the REIN and REIN Micro is only compatible with the REIN and REIN Micro variants. No reverse compatibility for other light manufactures exists.

MATERIALS

  • Precision machined from Certified 6061-T6 aluminum.
  • Type III Anodized to MIL STD. “Hard coat”.

POWER

  • A USA-made, state-of-the-art electrical system using the best components that money can buy. That gives us the output, efficiency and run-time that makes REIN Micro the class leader.
  • Uses a single 18350 battery. No CR123 batteries allowed. Use of CR123 batteries VOIDS your warranty. We supply one 18350 rechargeable battery with the REIN Micro. The battery has strong output with a shorter run-time of about 40 minutes. Please note that unlike its peers, REIN Micro will produce useable light for at least 3 straight hours.
  • Accepts ALL protected and unprotected 18350 batteries. Accepts both button-top and flat-top batteries. NOTE: Various battery sizes will require use of the provided Battery Jack feature.
  • Run-time at 100% power is industry-leading.

FEATURES

  • Modular 3-piece design makes the REIN Micro upgradeable over time.
  • Exceeds well over 55,000 Candela.
  • 1,300 Lumens of output.
  • IPX-8 waterproof rating. Fully submersible to 100 ft for 24 hours.
  • Run-time standard per ANSI/PLATO-FL1 = 40 minutes. The amount of time until the light reaches 10% of its original output.
  • Proprietary Field-Serviceable Lens System. The end-user can now replace the glass lens themselves. The glass on the REIN Micro is 3mm thick, which is the thickest in the industry. It can take multiple hits from 5.56mm Simuntion rounds.
  • S7 Tool Steel bezel ring. Heat-treated to 53 Rockwell. Your light is now an impact tool.
  • Patented Battery Jack feature. This allows you to properly tension the battery inside the system to avoid battery bounce. This lengthens the life of your system and increased reliability substantially.
  • Patented tail-cap cartridge is easily replaceable and allows for multiple configurations without removing the tail of the light.
  • REIN Micro comes standard with a push-button-only configuration. Located in the tail cap, the switch offers both momentary-on and constant-on capability.
  • The optional, patented remote switch offers both momentary and constant-on functionality. The optional remote switch is electrically isolated from the push-button switch located on the tail cap. If your optional remote switch suffers catastrophic failure, your REIN Micro still works via the tail cap button.
  • The optional remote switch is housed in a 3rd Generation Light Control System. Available only for the REIN and REIN Micro. It offers unprecedented cable management possibilities never before available even with prior generation LCS units. The optional remote switch is fully submersible and fully potted.
  • The optional remote switch utilizes a cable exit from the tail cap that is perpendicular to the bore axis. This allows your cable to be protected from potential snags and impact.
  • The optional remote switch wire is over-molded into the tail cap cartridge. And the tail cap body allows for the user to adjust the position of the tail cap based on user requirement or preference.
  • The optional remote switch cable is 5” long.
  • Shockproof. Dustproof.
  • Lifetime Warranty – with only a few exceptions. Remote switches are considered replaceable items not warranty items. Please see warranty info for full details.
  • Made in the USA. Manufactured and assembled in-house at our production facility.

DIMENSIONS

  • CANDELA 55,000
  • LUMENS 1,300
  • LENGTH 4.91″
  • WEIGHT without battery 4.95 oz.
  • WEIGHT with battery 5.75 oz.
  • BATTERY 18350